Carry-Bike – Accessories (pp. 228–239)

Rails (p. 228–231)

Rails for Carry-Bike. "Standard" = sliding as delivered; "optional" = possible with Kit Premium S.

Rail Plus / XL (p. 228)

Colour refers to the plastic details.

Rail profile (drawing): 70 mm wide, 43 mm high (30 mm channel).

Rail Quick Pro (p. 228)

Colour refers to the plastic details.

Blue and grey versions: ask for availability and delivery times. Profile (drawing): 57 mm wide, 43 mm high (35 mm channel).

Rail Quick C (p. 229)

Rail Premium / XL (p. 229)

The 31 cm strap suits all bikes on the market.

Rail Premium S (p. 230)

For Pro and Pro C models compatibility is only guaranteed for versions < 2023 (round tubes).

Rail Premium S Fat Bike (p. 230)

Comfortable 40 cm strap with fast, safe ratchet coupling. Not suitable for Carry-Bike Caravan XL A.

For Pro and Pro C models compatibility is only guaranteed for versions < 2023 (round tubes).

Kit Premium S (p. 231)

Converts Rail Quick and Rail Premium into Rail Premium S: remove the standard hooks and replace them with Premium S hooks; the rails can then slide vertically and horizontally to suit different bikes.

For Pro and Pro C models compatibility is only guaranteed for versions < 2023 (round tubes).

Kit Rail Premium 48 (p. 231)

Optional fourth two-part rail (2×) for Carry-Bike VW T5 Pro and T6 Pro (drawing: 61 mm).

Kit Upgrade E-Bike (p. 231)

Complete rail support base with two Rail Premium, structurally designed to carry two e-bikes on Carry-Bike Pro, Pro M or Pro C (≤ 2022 – 02094-09A / 02094-09V / 02094-11A / 02094-11V / 02094-10A / 02094-10V).

Bike-Block Pro S / Pro S D (p. 232)

Frame holders with 360° rotation, clamp range ø 25–100 mm, for tubes ø 30 mm (D30) or ø 30–35 mm.

* D35 for Carry-Bike Pro / Pro N, Motor Lift 77, Lift 77, VW T6 Pro, VW T5 Pro, Mercedes V Class, Lift E-Bike.

Bike-Block Pro S D1 Deep Black is printed with the same code and EAN as Pro S 1 - D35 Deep Black (08831G01A / 8004815459727); the correct code is not given in the catalogue – check with Fiamma before ordering.

Licence Plate Carrier (p. 233)

Aluminium licence-plate bar with regulation lights (drawing: 1230 / 1310 mm long, 165 mm high, 75 mm).

Read from the p. 233 chart: the Licence Plate Carrier is standard only on Carry-Bike Mercedes Viano; optional on all others except VW T2 (–).

Kit Support Bar 600 mm (p. 234)

Kit of 2 preformed smart bars in anodised aluminium (ø 30 mm) to fix the Carry-Bike to motorhome walls. Complete with through screws, internal fixing brackets and end caps; the screws slide along the bar to adapt to different wheelbases. Recommended for all Carry-Bikes carrying 4 bicycles. Max 80 kg.

✓ suitable; * with Kit 307338; ** adapter delivered as standard; *** delivered as standard. Lower Rail Fiamma: min/max 40/50 cm.

Kit Adhesive Bar Gasket (p. 234)

Optional seal for installing Kit Bars DJ or Carry-Bike DJ Ducato by drilling only; positioned at the rear of the bar, it ensures proper sealing and protects the vehicle.

Fixing Bar Carry-Bike (p. 235)

Pair of reinforcement bars (240 cm long) for vehicles whose rear walls have no internal reinforced points.

Dust Guard (p. 235)

Rubber guard for Fixing-Bar, Carry-Bike and Deluxe ladders. Length: 240 cm (drawing: min 25).

Kit Rail Support Base Block (p. 235)

Bracket locking kit for Carry-Bike Pro/N and Pro C/N ≥ 2023. Prevents knocks caused by potholes, bumps and road irregularities, minimising stress. Pack of 2.

Quick Safe / Strip / Security Strip / Cable-Lock / Bike Frame Adapter (p. 236)

Bike Cover / Super / Premium (p. 237)

* Not suitable for bike racks where the bikes stick out above the roof. Not suitable for Carry-Bike for van conversions and camper vans. Rows 02096-09- … 02093A57A = motorhome, 02096-23- … 02093A36A = caravan.

Ultra-Box (p. 238)

Rear boxes in top-quality ABS-PLUS, solid and strong, resistant to stress, impacts and bad weather. Co-extruded with extra thickness against deterioration, with stainless-steel hinges and aluminium profiles. They fit only Carry-Bikes for motorhomes, with the included kit. TÜV Rheinland certified.

* Carry-Bike Pro series (with oval tubes) is compatible with Ultra-Box ≥ 01/2025. Not suitable for Carry-Bike with offset rails. Ultra-Box 500 drawing: 1470 × 700 mm, depth 530 mm, opened 830 × 1030 mm.

Codes corrected: Lift 77 = 02096-44- and Pro Autotrail = 02093A98A (as on pp. 167, 170, 177/180 with EAN). P. 237 prints Lift 77 as 02096-43-, p. 238 prints Pro Autotrail as 02093B98A.

Easy Dry (p. 239)

Quick installation on the folding rail support base of all bike carriers with ø 35 mm tube; no drilling on Carry-Bikes with a 60–80 cm wheelbase. The end parts hook onto the rail-support tube and the drying rack is ready; thanks to its folding structure you can even travel with it fitted. Comes with plasticised ropes for hanging clothes and adjusting handles.

For Pro and Pro C models compatibility is only guaranteed for versions < 2023 (round tubes).

Cargo Back / Kit Frame Cargo Back (p. 239)

Cargo Back: made of solid, tear-resistant, waterproof polyester; easy to install on all rear bike carriers; its attachment system now also fits Carry-Bikes with offset rails. Kit Frame Cargo Back keeps the Cargo Back sturdy even when not completely full.